PocketWizard AC3-N ZoneController for Nikon

Product Code: PW804709

Availability:Out of stock

PocketWizard AC3-N ZoneController for Nikon

Product Code: PW804709

Availability:Out of stock

Limited Time Offer

AC3-N ZoneController for Nikon

The AC3-N ZoneController slides into the shoe of an on-camera PocketWizard MiniTT1 or FlexTT5 and enables Auto and/or manual control of three or more remote Nikon speedlites mounted FlexTT5 transcievers.

Simply slide the AC3-N ZoneController into the shoe of an on-camera PocketWizard MiniTT1 or FlexTT5 and control three or more remote Nikon speedlites mounted FlexTT5 transceivers. Three zones, marked A, B, and C, correspond to Zone Switch settings on the receiving FlexTT5 units. Each zone has a Mode Switch that enables manual or automatic flash control or switching off a flash completely. Clearly marked dials allow increasing or decreasing the power of each flash in 1/3-stop increments over a six-stop range. Remote flashes need only to be ON and set to ETTL and the corresponding zone set on the FlexTT5 you wish to control. Photographers can switch back and forth between auto and manual flash control and use both for the same shot, all right from the cameras position.


E-TTL II Compatibility: Using PocketWizard's ControlTL system, the AC3 is
designed to work seamlessly with Nikon's E-TTL II system. It removes operating
complexity with its easy-to-use design. Nikon i-TTL version coming soon.

Three Zone Control: Control up to three zones of light, each with one or more
flashes,right from the camera's position. Set zones to manual, auto, or switch any
zone OFF.Settings can even be mixed between zones.

Wide range of control: With three simple dials, you can quickly adjust the power
settings for three independent zones in clearly labeled 1/3 stop increments over
a six stop range. In Auto mode, the dials act as flash exposure compensation. In
manual mode, +3 on the dial indicates the flashes maximum power level.
Adjusting the dial down controls power in 1/3 stop increments for up to six
stops of control.

Studio Flash Compatibility: When used with the PocketWizard PowerST4
Receiver for Elinchrom RX, the power levels as well as modeling light function
can be controlled by the AC3 and PocketWizard ControlTL system. The AC3 can
also used to control Nikon E-TTL flashes or any PocketWizard triggered flash as
well. [or a FlexTT5 paired with an AC9 AlienBees Adapter, and White Lightning
studio flash. coming with AC9]

Product Dimensions

Length: 2 inches (5 cm)

Width: 1.7 inches (4.2 cm)

Height: 0.9 inches (2.1 cm)

Weight: 0.82 oz

Shipping Dimensions

Length: 4.25 inches (10.80cm)

Width: 4.25 inches (10.80cm)

Height: 1.75 inches (4.45 cm)

Weight: 0.15 lbs. (0.07 kg)

TTL Compatibility Nikon CLS/i-TTl, Elinchrome RX, AlienBees,


Range - Performance / Basic Up to 500 meters (1600 feet)


Input-Output Connection : 3.5mm (1/8") stereo miniphone

jack, hot shoe

Triggering Speed: Up to 14.5 FPS

Voltage Present 76 volts, safe for use with all digital

and film cameras

Contact Time 135 milliseconds in normal operation

Power Two (2) AA (IEC: LR6) alkaline recommended

Battery Life Up to 50 hours (with alkaline batteries)

Mounting Hot shoe, lanyard/D-Ring loop, ¼-20 threaded


Status Indicator LED: Green status indicator

Storage Temperature Above -30° C (22° F) and below 85° C (185° F)

(without battery)

ROHS Compliant Yes

Selector Switch Off, Manual, Auto (PowerTracking/E-TTL II)

Adjustment Range Auto = +/- 3 stops, 1/3 stop increments

Requirements MiniTT1 Transmitter or FlexTT5 Transceiver with

firmware version 5.10 (or later) needed as a host.

Housing/ Construction High Impact Plastic

Operating Temperature Above -15° C (5° F) and below 50° C (120° F)

Customer Reviews

No reviews yet