Rode NT4-Fixed X-Y Stereo Mic with 3.5mm Minijack & Dual XLR Connectivity
Product Code: RODNT4
Availability:Out of stock
Rode NT4-Fixed X-Y Stereo Mic with 3.5mm Minijack & Dual XLR Connectivity
Product Code: RODNT4
Availability:Out of stock
Highlights
- Offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment.
- Simply place the microphone and capture a realistic stereo field using a single microphone.
- Creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.
- Ability to be powered by a 9V battery, in addition to 48V phantom power.
- Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone. Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field. The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
- Acoustic Principle Pressure Gradient
- Active Electronics JFET impedance converter with bipolar output buffer
- Capsule 0.50"
- Polar Pattern CardioidPaired cardioid capsules in X-Y stereo pattern
- Address Type End
- Frequency Range 20Hz - 20kHz
- Output Impedance 200O
- Maximum SPL 143dB SPL (@ 1kHz, 1% THD into 1KO load)
- Maximum Output Level 13.9dBu (@ 1kHz, 1% THD into 1KO load)
- Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted) 16dB-A
- Power Options 9V Battery+48V phantom power
- Weight 480.00gm
- Dimensions 231.00mmH x 61.00mmW x 33.00mmD
- Dimensions 231.00mmH x 61.00mmW x 33.00mmD
- Output XLR OutputMinijack Output
- Warranty 1 year with free extension to 10 years following registration
- NT4 X/Y Stereo Condenser Microphone
- RM3Durable Microphone Clip
- RC4Rugged Microphone Case
- WS4Pop Filter/Wind Shield
- 5-pin to Stereo Minijack Cable
- 5-pin to dual XLR cable