Tascam SD-20M Solid-State Recorder

Product Code: TASD20M

Availability:Out of stock

Tascam SD-20M Solid-State Recorder

Product Code: TASD20M

Availability:Out of stock

Limited Time Offer
$299.99

Highlights

  • XLR/TSR combo microphone inputs on the front panel
  • Four-track recorder capable of simultaneously recording from both the mic inputs and line inputs
  • Dual recording function captures a copy of your audio at a lower level, for a distortion-proof safety track
  • Can record a copy of the audio at a lower level according to the set audio recording level. This allows for a backup recording in case of distortion from unexpected loud noises.
  • In addition to the AC adapter, it can also operate using four AA batteries, which allows for recording to continue even if AC power is lost

Easy-to-use, single-Rackspace SD card recorder with XLR mic inputs. TASCAM’s SD-20M is a simple-to-use solid-state recorder for demanding installations. The 1U rack mount includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic inputs and line inputs can be recorded simultaneously in four-channel mode. The dual recording mode captures a copy of your audio at a lower level, as insurance against distorted takes. The SD-20M includes a battery backup system – AA batteries can keep recording for hours in case of power loss. A wired remote or footswitch can be attached to control recording and playback. Variable speed playback allows the playback to be changed without affecting the pitch. Designed for installations like schools, house of worship, and conferences, the TASCAM SD-20M is a flexible, affordable solution for long-form recording.

SD-20M SPECIFICATIONS

Recording media

SD card (64MB - 2GB), SDHC card (4GB - 32GB), SDXC card (48GB - 128GB)

Recording and playback file format

WAV

Sampling frequency

44.1k/48k/96k Hz

Quantization bit rate

16/24 bit

MP3

Sampling frequency

44.1k/48k Hz

Playback bit rate

64k - 320k bps

Number of channels

4-channel (2 Stereo / 4 Monaural)

Analog audio inputs

BALANCED

Connector

XLR-3-31 (1:GND, 2:HOT, 3:COLD)
6.3mm(1/4")TRS standard jack

LINE IN

Input Impendance

10k ohms

Standard input level

+4dBu

Minimum input level

+20dBu

Maximum Input Level

-6dBu or more

MIC IN

Input Impendance

2.7k ohms

Minimum input level

+0dBu (GAIN at ”Low”)

Maximum Input Level

-67dBu or more (GAIN at ”High”)

UNBALANCED

Connector

RCA pin jacks

Input Impendance

22k ohms

Standard input level

-10dBV

Minimum input level

+6dBV

Maximum Input Level

-20dBV or more

Analog audio output

UNBALANCED

Connector

RCA pin jacks

Output impedance

200 ohms

Standard output level

-10dBV

REMOTE

Connector

2.5mm TRS jack

PHONES

Connector

6.3mm(1/4")stereo phone jack

Maximum output level

20mW + 20mW (32ohms load, THD+N:less than 0.1%)

Power

Dedicated AC adapter (PS-P1220E, included), 
4 AA batteries

Power consumption

5W

Dimensions

483(W)×45(H)×299.6(D)mm
19(W)×17.4 (H)×11.8(D)inch

Weight

2.7 kg / 6 bl(Without battery)

Operating temperature

5 to 35°C

Accessories

AC adapter, Rack-mount screw kit, Warranty card, Instruction manual

Audio Performance

Frequency response

20 - 20kHz +0.5dB/-3dB (JEITA)

THD

0.01% or less

S/N ratio

100dB or more (JEITA)

Dynamic range

100dB or more (JEITA)

Interchannel crosstalk

100dB or more (JEITA)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)